Call: +353 (0)1 4019728 | Email:

Call: +353 (0)1 4019728

Brick Cavity Trays

Brick Cavity Trays

  • Used on external walls – not more than 102.5mm in thickness.
  • Cavity widths of between 50mm-125mm.
  • Brick cavity trays are used at the abutment of a pitched roof with a cavity wall.
  • Pre-formed brick cavity trays save both time and labour on site.
  • Trays can be supplied with factory fitted lead flashing,
  • 150mm high back upstand.
  • Permanent stop-end prevents water backtracking along the brickwork.
  • Brick cavity trays are built into the outer leaf only to speed up installation and allow both inner and outer leafs to be built independently if required.
  • Manufactured to BS EN ISO 9001 : 2008.
  • Complies with all relevant Building Regulations.
  • BBA approved.
  • Lead flashings are Code 4 milled lead as standard.
  • System consists of abutment trays, catchment trays, apex trays and corner catchment trays.

Speak to a member of our team on +353 (1) 4019728 who will happily calculate your requirements. Trays are manufactured and delivered to site within 1-2 working days. Alternatively you can send us information through our contact page.