Fire Protection, Ducting Anicillaries

Fire Pipe Wraps

Uses

• Pipe wraps reinstate the fire resistance of a wall or floor which has been penetrated by plastic flammable pipes used in soil, waste, air and drainage services.
• The active element contained is specifically formulated to close and seal the aperture during the decomposition stage of the flammable service, creating a highly effective fire resistant barrier to minimise the propagation and permeation of hot gases into adjacent compartment.

Features & Benefits

• Available in two fire ratings; 2 hour or 4 hour
• Easy to place around pipe and slide into position
• Intumescent material is totally unaffected by water
• It is robust, non flaking and difficult to tear
• Colour coded; Red sleeve 200series (2 hr fire) and silver sleeve 400 series (4 hr fire)
• Wraps should be installed centrally within the supporting construction wall to achieve EI120
• No migratory plasticisers which could result in degradation and softening of pipe material
• Pre measure wraps for speed of installation, minimising waste and disposal
• Designed specifically to prevent passage of fire and hot gases through concrete and masonry constructions
• Suitable for plastic flammable pipes with PVC-C, PVCU, PE, PP, ABS, & SAN+PVC pipes
• Tested in accordance with BS476:Part 20 & BS EN1366- 3, achieving a fire resistance period of up to 240 minutes
• Classified in accordance with Certifire TS01 certification No CF635/ CE Mark 2812—CPR-JA5003, ETA 20/1209
• Product is guaranteed by Pyroplex for a period of 10 years

Installation

1. The wall or floor must be solid construction not less than 100mm in overall thickness. The recess hole must be the correct size.
2. Fix wrap around pipe using adhesive tab and slide along pipe into wall/floor cavity to a depth of 5mm min/10mm max.
3. After insertion, the cavity around the pipe can be made good with filler, The surface can then be decorated. Must not be used in stud wall partitioning system

Specifications

Documents