Mechanical Ventilation Heat Recovery – Centralised
ICON can provide from a number of mechanical heat recovery ventilation (MHRV) units depending on your particular needs and building volume. Units are located centrally and operate on a continuous basis extracting moisture laden air from “wet rooms” (kitchens, bathrooms, en-suites, utilities) while balancing this by providing fresh air to dry rooms (bedrooms, living rooms, etc).
As the incoming fresh air passes over the heat exchanger within the unit it absorbs a high amount of heat energy from the extracted air also passing through the exchanger albeit through an alternate route. This heated incoming air is then distributed to the dry habitable rooms.
MHRV systems can considerably reduce your space heating requirement thereby reducing your overall energy demand while at the same time controlling the humidity and condensation levels within your dwelling making for healthier indoor environment.
When specifying or installing a ventilation system, consideration must be given to the total floor area, national building regulations, air permeability, occupancy levels, installation standards and ease of user operation and maintenance.
HRX-aQ MVHR Unit
Fits into ceiling voids and utility cupboard spaces. Ideal for apartments.
The most compact and intelligent void mounted MVHR ceiling unit on the market, the HRX-aQ enables contractors to deliver quicker installation with minimum hassle.
- Very low specific fan power – 0.66 W(l/s)
- Bluebrain control optimises the unit’s functionality and allows for and easy commissioning.
- Heat exchange efficiency of 88%.
- Extremely quiet.
- Compact and lightweight – 199mm deep, 7.9kg in weight.
- Efficiently extracts up to 30 ltrs at boost.
- Uses 204×60 rigid ducting or semi-rigid radial ducting.
- Full design service. Please contact our technical team for pricing and sizing.


HRXE Heat Recovery Ventilator
A highly intelligent and lightweight MVHR unit, the HRXE offers superior performance coupled user operation.
- Very low specific fan power – down to 0.57 W(l/s)
- Control options including frost protection, humidity control and fan speed located on the front of the unit.
- Heat exchange efficiency up to 90%.
- Extremely quiet.
- Compact and lightweight – 507mm high.
- Efficiently extracts up to 72 ltrs at boost.
- Uses 125mm ducting off the unit with 204x60mm rigid ducting or semi-rigid radial ducting.
- Full design service.


HRX2D MHRV Unit
Ideal for larger developments, the HRX2D is a highly efficient and intelligent MVHR unit, which is quick and easy to install and operate. Mount onto a wall in either a kitchen or utility cupboard space, or in a loft.
- Very low specific fan power – 0.66 W(l/s)
- Bluebrain control optimises the unit’s functionality and allows for and easy commissioning.
- Heat exchange efficiency of 94%.
- Extremely quiet.
- Efficiently extracts up to 113 ltrs at boost.
- Uses 204x60mm rigid ducting or semi-rigid radial ducting.
- Full design service.


MHVR Accessories
Blue brain control
The Bluebrain controller is compatible with the HRX-aQ / HRXD / HR2D MVHR units
Through advanced AMIE technology (Air Management for Indoor Environments) the Bluebrain not only offers simple pre-programmed functions such as humidity control and a thermal bypass function, it also allows for straightforward commissioning.
- 3 variable speeds
- Diagnostics indicator
- Clean filter indicator
- Frost protection
- Run on and delayed boost timer
- Commissioning mode
- Air temperature display
- Extract air humidity level display

MHRV Accessories
Condensation drain kit

MVHR Accessories
HRXC-AF – Filter
