Slate Vents

Speak to a member of our team on +353 (1) 4019728 who will happily give advice on your roof ventilation requirements. Slate vents can be delivered to site within 1-2 working days.

IST10 Slate Ventilator

  • For slate roof ventilation or soil vent pipes or mechanical extract ventilation (with accessories)
  • For remedial work on existing roofs with man-made or natural slates
  • Suitable for roof pitches between 20° and 60°
  • For use at high level or low level where the roof construction does not allow eaves or ridge vents
  • Economical general purpose cowl vent
  • Universal slate vent, suits slate sizes 610x305mm or 510x255mm
  • Inconspicuous low hood design
  • Can be installed as required during slating process
  • Efficient, unobtrusive and easy to install
  • Driving rain and deluge rain resistance
  • Complies with current Building Regulations; BS5250 & BS5534, ICP2
  • Manufactured to BSEN ISO 9001:2000
  • Available in Anthracite only

DOWNLOAD DATA SHEET

ISG8 Slate Vent

  • Glidevale G8 Slate Vent tested to between 20 deg and 60 deg roof pitch.
  • Used for venting soil pipes and mechanical extract.
  • Suitable for both remedial and new build installations.
  • 100m integral spiggot to underside.
  • For use at high level and low level where the roof construction does not allow eaves or ridge vents.

DOWNLOAD DATA SHEET

ISG3 Slate vent

  • Glidevale G3 slate vent is suitable for new build and remedial installations for roof and batten space ventilation.
  • Tested to between 20 deg and 60 deg roof pitch.
  • Can be used for venting soil pipes and Mechanical extract / HRV with appropriate adaptors.
  • Can take 100mm spiggot to underside.
  • For use at high level and low level where the roof construction does not allow eaves or ridge vents.

DOWNLOAD DATA SHEET

ISG5 Slate vent

  • Glidevale G5 slate vent – tested to between 20 deg and 60 deg roof pitch.
  • Suitable for new build and remedial installations for roof and batten space ventilation.
  • Cab be used for venting soil pipes and Mechanical extract / HRV with appropriate adaptors.
  • Can take 100mm, 125mm and 150mm spiggot to underside.
  • For use at low level where the roof construction does not allow eaves or vents.

DOWNLOAD DATA SHEET

10K Slate ventilator

  • For slate roof ventilation or soil vent pipes or mechanical extract ventilation (with accessories)
  • For new build or refurbishment work
  • Suitable for roof pitches between 20° and 70°
  • For use at high level or low level where the roof construction does not allow eaves or ridge vents
  • Low profile design to blend with the roof line
  • Slate grey caps to suit most man-made or natural slates
  • Economical general purpose cowl vent
  • Can be installed as required during slating process
  • Efficient, unobtrusive and easy to install
  • Prevents entry of birds and large insects
  • Suitable for 600×300 or 500x250mm
  • Complies with current Building Regulations; BS5250 & BS5534, ICP2

DOWNLOAD DATA SHEET

20K Slate ventilator

  • Large capacity ventilating slate to suit 600×300 and 500x250mm double lap slates.
  • For new build or refurbishment work
  • Suitable for roof pitches between 20° and 70°
  • For use at high level or low level where the roof construction does not allow eaves or ridge vents
  • Low profile design to blend with the roof line
  • Slate grey caps to suit most man-made or natural slates
  • Fully wind tunnel tested
  • Built in downpipe to ensure direct ventilation path into the roof space
  • Can be installed as required during slating process
  • Efficient, unobtrusive and easy to install
  • Prevents entry of birds and large insects
  • Suitable for 600×300 or 500x250mm
  • Complies with current Building Regulations; BS5250 & BS5534, ICP2

DOWNLOAD DATA SHEET

Small Slate Ventilator

  • For slate roof ventilation or soil vent pipes or mechanical extract ventilation (with accessories)
  • For remedial work on existing roofs with man-made or natural slates
  • Suitable for roof pitches between 20° and 70°
  • For use at high level or low level where the roof construction does not allow eaves or ridge vents
  • Economical general purpose low profile cowl vent
  • Can be installed as required during slating process
  • Efficient, unobtrusive and easy to install
  • Slate grey cap blends with most natural and man-made slates
  • Clearly marked for cutting to various slate sizes
  • Prevents entry of birds and large insects
  • No adaptor required to convert to soil ventilation or mechanical extraction using 75/100mm flexipipe
  • Complies with current Building Regulations; BS5250 & BS5534, ICP2

DOWNLOAD DATA SHEET

Klober Uniline Slate Vent

  • Suitable for both remedial and new build installations.
  • Klober Uniline Slate Vent Vent tested above 22.5 deg roof pitch.
  • Built in downpipe allows for direct ventilation of roof space.
  • No soil vent adaptor required
  • For use at high level and low level where the roof construction does not allow eaves or ridge vents.
  • Ventilation Capacity – 12,000mm2
  • Installed as required during the slating process.
  • Available in Dark Slate and Slate Grey colours.
  • Complies with Building Regulations, BS 5250, BS5534 and ICP2
  • Used for roof ventilation, soil pipe extract and mechanical extract.

DOWNLOAD DATA SHEET

ISG11 In-line Slate vent

  • Glidevale Inline Slate Vent Vent tested to between 20 deg and 60 deg roof pitch
  • 100mm integral spiggot to underside.
  • For use at high level and low level where the roof construction does not allow eaves or ridge vents.
  • Ventilation Capacity – 10,000mm2
  • Colour – Blue/Black.
  • Inline design.
  • Installed as required during the slating process.
  • Glidevale Inline slate vent is driving rain and deluge rain resistant.
  • AA Fire Rating to BS476: Part 3 : 2004
  • Colour blending service available.
  • Complies with Building Regulations, BS 5250, BS5534 and ICP2

DOWNLOAD DATA SHEET