Universal Tile Vents
Speak to a member of our team on +353 (1) 4019728 who will happily give advice on your roof ventilation requirements.
IVT G5 Universal Tile Vent
- Used for roof ventilation, soil pipe extract and mechanical extract.
- Suitable for both remedial and new build installations.
- Separate 100mm,125mm,and 150mm spiggots to underside.
- For use at high level (G3 ) and low level(G3 and G5).
- Suitable for roof pitches between 20 and 60 degrees.
- Size – Universal
- Ventilation Capacity G3– 10,000mm2
- Ventilation Capacity G5 – 20,000mm2
- ABS and VO Fire retardant material.
- Colour – Blue/Black, Terracotta, Brown.
- Cowl design .
- Installed as required during the tiling process.
- Glidevale Universal tile vents are driving rain and deluge rain resistant.
- AA Fire Rating to BS476: Part 3 : 2004
- Colour blending service available.
- Complies with Building Regulations, BS 5250, Bs5534 and ICP2

15K Universal Tile Vent
- For tile roof ventilation, soil vent pipes or mechanical extract ventilation (with accessories)
- For remedial work on existing roofs
- Suitable for roof pitches between 17.5° and 60°
- For use at high level or low level where the roof construction does not allow eaves or ridge vents
- Universal design suits all single lap interlocking roof tiles.
- Low profile design
- Choice of four colours
- Wind tunnel tested
- Adaptor available for soil ventilation or mechanical extraction
- Efficient, unobtrusive and easy to install
- Complies with current Building Regulations; BS5250 & BS5534, ICP2

20K Universal Tile Vent
- For tile roof ventilation, soil vent pipes or mechanical extract ventilation (with accessories)
- For remedial work on existing roofs
- Suitable for roof pitches between 17.5° and 60°
- For use at high level or low level where the roof construction does not allow eaves or ridge vents
- Universal design suits all single lap interlocking roof tiles.
- Low profile design
- Choice of two colours
- Wind tunnel tested
- Perfect solution for heat recovery systems with 150mm adaptor
- Efficient, unobtrusive and easy to install
- Complies with current Building Regulations; BS5250 & BS5534, ICP2

ITG3 Tile Vent
- 10,000mm2 Capacity
- Soil / Mechanical extract adaptor available to suit 100mm, 125,mm and 150mm.
- Suitable for high and low level ventilation and mechanical / soil extract.

ITG5 Tile Vent
- 20,000mm2 Capacity
- Soil / Mechanical extract adaptor available to suit 100mm, 125,mm and 150mm.
- Suitable for low level ventilation and mechanical / HRV.

Uniline Tile Vent
- For tile roof ventilation, soil vent pipes or mechanical extract ventilation (with accessories)
- For remedial work on existing roofs
- Suitable for roof pitches between 20° and 60°
- Suitable for most popular interlocking and plain tile roofs.
- High or low level roof ventilation
- In– line design
- Choice of four colours
- Efficient, unobtrusive and easy to install
- Fully wind tunnel tested
- Built in downpipe allows direct ventilation to roof space
- No mechanical adaptor required
- Complies with current Building Regulations; BS5250 & BS5534, ICP2
- Can be used for roof space ventilation or act as a terminal for soil ventilation or mechanical extraction

IVGP Inline concrete tile vent
- For tile roof ventilation, soil vent pipes or mechani-cal extract ventilation (with accessories)
- Minimum roof pitches of 22.5° and above
- For use at low level or high level roof ventilation
- Forms integral part of the roof tile covering

Adaptors and Flexis
- GV110 – Standard 100mm Soil Adaptor. Integral with all G8 tile vents. Available as separate item to suit G3 tile vent.
- TT9 – 125mm Adaptor – Mechanical / Soil extract. Available as separate item to suit G3 / G5 tile vent.
- TT13 – 150mm Adaptor – Mechanical extract / HRV. Available as separate item to suit G3 / G5 tile vent.
